This is the latest recevied telemetry packets stored in our database for station/object SM0UQT-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765375843 | 35 Count | 375 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765374939 | 34 Count | 354 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765374035 | 33 Count | 345 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765373132 | 32 Count | 337 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765372228 | 31 Count | 329 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765371324 | 30 Count | 321 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765370420 | 29 Count | 313 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765369516 | 28 Count | 307 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765368612 | 27 Count | 300 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765367708 | 26 Count | 291 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765366804 | 25 Count | 286 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765365900 | 24 Count | 280 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765364997 | 23 Count | 271 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765364092 | 22 Count | 263 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765363189 | 21 Count | 254 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765362285 | 20 Count | 246 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765361381 | 19 Count | 238 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765360477 | 18 Count | 231 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765359573 | 17 Count | 218 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765358669 | 16 Count | 213 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765357765 | 15 Count | 204 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765356861 | 14 Count | 196 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765355959 | 13 Count | 184 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765355053 | 12 Count | 176 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1765354149 | 11 Count | 164 Count | 0 Count | 0.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)