K0FTT Automobiles

My position About ☰

reset

HS9BZG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS9BZG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR*	BAT*
1765356780	44.79 °C	30.2 %RH	990.6 hPa	4.18 V
1765356180	45.19 °C	30.3 %RH	990.6 hPa	4.18 V
1765355580	44.43 °C	30.6 %RH	990.6 hPa	4.11 V
1765354980	45.41 °C	30.1 %RH	990.6 hPa	4.13 V
1765354380	46.06 °C	30.1 %RH	990.7 hPa	4.15 V
1765353780	46.17 °C	30.3 %RH	990.7 hPa	4.18 V
1765353180	45.91 °C	30.7 %RH	990.8 hPa	4.18 V
1765352580	45.25 °C	31.3 %RH	990.9 hPa	4.18 V
1765351980	44.38 °C	32.1 %RH	991 hPa	4.18 V
1765351380	43.64 °C	32.9 %RH	991.2 hPa	4.18 V
1765350780	43.14 °C	33.4 %RH	991.4 hPa	4.18 V
1765350180	42.29 °C	34.2 %RH	991.5 hPa	4.18 V
1765349580	41.47 °C	35 %RH	991.7 hPa	4.18 V
1765348980	40.68 °C	35.9 %RH	992 hPa	4.18 V
1765348380	39.93 °C	36.6 %RH	992.2 hPa	4.18 V
1765347780	38.86 °C	37.6 %RH	992.4 hPa	4.17 V
1765347180	38.13 °C	38.4 %RH	992.6 hPa	4.17 V
1765346579	36.78 °C	39.7 %RH	992.8 hPa	4.16 V
1765345979	35.18 °C	40.9 %RH	993 hPa	4.11 V
1765345379	34.74 °C	41.1 %RH	993.2 hPa	4.12 V
1765344779	34.98 °C	41 %RH	993.4 hPa	4.14 V
1765344179	34.85 °C	41.3 %RH	993.6 hPa	4.18 V
1765343579	34.72 °C	41.6 %RH	993.8 hPa	4.18 V
1765342979	34.44 °C	42 %RH	994 hPa	4.18 V
1765342379	34.24 °C	42.3 %RH	994.1 hPa	4.18 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 800

BAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)