This is the latest recevied telemetry packets stored in our database for station/object KY1N-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765296705 | 497 Volts | 563 Deg.F | 0 | 0 | 0 |
| 1765296677 | 497 Volts | 562 Deg.F | 0 | 0 | 0 |
| 1765296652 | 501 Volts | 561 Deg.F | 0 | 0 | 0 |
| 1765296562 | 498 Volts | 561 Deg.F | 0 | 0 | 0 |
| 1765296542 | 503 Volts | 561 Deg.F | 0 | 0 | 0 |
| 1765296479 | 502 Volts | 560 Deg.F | 0 | 0 | 0 |
| 1765296474 | 502 Volts | 560 Deg.F | 0 | 0 | 0 |
| 1765296469 | 499 Volts | 560 Deg.F | 0 | 0 | 0 |
| 1765296457 | 502 Volts | 559 Deg.F | 0 | 0 | 0 |
| 1765296285 | 501 Volts | 558 Deg.F | 0 | 0 | 0 |
| 1765296197 | 500 Volts | 558 Deg.F | 0 | 0 | 0 |
| 1765296191 | 500 Volts | 557 Deg.F | 0 | 0 | 0 |
| 1765296158 | 498 Volts | 557 Deg.F | 0 | 0 | 0 |
| 1765296147 | 504 Volts | 557 Deg.F | 0 | 0 | 0 |
| 1765296136 | 501 Volts | 556 Deg.F | 0 | 0 | 0 |
| 1765296126 | 504 Volts | 555 Deg.F | 0 | 0 | 0 |
| 1765296095 | 498 Volts | 555 Deg.F | 0 | 0 | 0 |
| 1765295826 | 495 Volts | 553 Deg.F | 0 | 0 | 0 |
| 1765295736 | 502 Volts | 553 Deg.F | 0 | 0 | 0 |
| 1765295557 | 483 Volts | 551 Deg.F | 0 | 0 | 0 |
| 1765295405 | 499 Volts | 551 Deg.F | 0 | 0 | 0 |
| 1765295281 | 501 Volts | 550 Deg.F | 0 | 0 | 0 |
| 1765295005 | 489 Volts | 548 Deg.F | 0 | 0 | 0 |
| 1765294887 | 504 Volts | 547 Deg.F | 0 | 0 | 0 |
| 1765294705 | 505 Volts | 546 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)