This is the latest recevied telemetry packets stored in our database for station/object DO1FE-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765308665 | 3.24 VDC | 0 | 0 | 0 | 0 |
| 1765307101 | 3.44 VDC | 0 | 0 | 0 | 0 |
| 1765304853 | 3.55 VDC | 0 | 0 | 0 | 0 |
| 1765302750 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1765300647 | 3.72 VDC | 0 | 0 | 0 | 0 |
| 1765298544 | 3.78 VDC | 0 | 0 | 0 | 0 |
| 1765296442 | 3.82 VDC | 0 | 0 | 0 | 0 |
| 1765292236 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1765292213 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1765292182 | 3.89 VDC | 0 | 0 | 0 | 0 |
| 1765292159 | 3.89 VDC | 0 | 0 | 0 | 0 |
| 1765292136 | 3.89 VDC | 0 | 0 | 0 | 0 |
| 1765292090 | 3.89 VDC | 0 | 0 | 0 | 0 |
| 1765292067 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1765292044 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1765292021 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1765291997 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1765291975 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1765291951 | 3.89 VDC | 0 | 0 | 0 | 0 |
| 1765291882 | 3.89 VDC | 0 | 0 | 0 | 0 |
| 1765291836 | 3.89 VDC | 0 | 0 | 0 | 0 |
| 1765291813 | 3.9 VDC | 0 | 0 | 0 | 0 |
| 1765291790 | 3.9 VDC | 0 | 0 | 0 | 0 |
| 1765291727 | 3.9 VDC | 0 | 0 | 0 | 0 |
| 1765291682 | 3.91 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)