This is the latest recevied telemetry packets stored in our database for station/object SP3LSN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765376749 | 331 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765374948 | 330 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765367753 | 326 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765365952 | 325 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765364152 | 324 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765362351 | 323 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765360550 | 322 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765358749 | 321 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765356949 | 320 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765355148 | 319 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765353348 | 318 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765351547 | 317 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765349746 | 316 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765347946 | 315 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765346152 | 314 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765344352 | 313 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765342551 | 312 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765340750 | 311 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765338950 | 310 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765337149 | 309 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765335348 | 308 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765333548 | 307 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765331747 | 306 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765329947 | 305 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765328146 | 304 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)