This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765350662 | 730 Count | 948 Count | 504 Count | 4.1 VDC | 0 VDC |
| 1765348860 | 728 Count | 946 Count | 503 Count | 4.1 VDC | 0 VDC |
| 1765347060 | 722 Count | 940 Count | 498 Count | 4.11 VDC | 0 VDC |
| 1765345258 | 720 Count | 938 Count | 497 Count | 4.1 VDC | 0 VDC |
| 1765343458 | 719 Count | 936 Count | 497 Count | 4.1 VDC | 0 VDC |
| 1765341658 | 717 Count | 933 Count | 496 Count | 4.11 VDC | 0 VDC |
| 1765339856 | 716 Count | 931 Count | 496 Count | 4.1 VDC | 0 VDC |
| 1765338056 | 714 Count | 928 Count | 495 Count | 4.11 VDC | 0 VDC |
| 1765336255 | 713 Count | 927 Count | 495 Count | 4.11 VDC | 0 VDC |
| 1765334455 | 711 Count | 925 Count | 494 Count | 4.11 VDC | 0 VDC |
| 1765332654 | 709 Count | 923 Count | 493 Count | 4.11 VDC | 0 VDC |
| 1765330853 | 707 Count | 921 Count | 492 Count | 4.11 VDC | 0 VDC |
| 1765329052 | 706 Count | 920 Count | 492 Count | 4.11 VDC | 0 VDC |
| 1765327252 | 704 Count | 918 Count | 491 Count | 4.11 VDC | 0 VDC |
| 1765325451 | 703 Count | 916 Count | 491 Count | 4.11 VDC | 0 VDC |
| 1765323651 | 701 Count | 914 Count | 490 Count | 4.11 VDC | 0 VDC |
| 1765321849 | 700 Count | 912 Count | 490 Count | 4.1 VDC | 0 VDC |
| 1765320049 | 698 Count | 910 Count | 489 Count | 4.11 VDC | 0 VDC |
| 1765318248 | 696 Count | 908 Count | 488 Count | 4.11 VDC | 0 VDC |
| 1765316447 | 693 Count | 905 Count | 486 Count | 4.11 VDC | 0 VDC |
| 1765314647 | 692 Count | 904 Count | 486 Count | 4.11 VDC | 0 VDC |
| 1765312846 | 689 Count | 901 Count | 484 Count | 4.11 VDC | 0 VDC |
| 1765311046 | 687 Count | 899 Count | 483 Count | 4.11 VDC | 0 VDC |
| 1765309245 | 685 Count | 896 Count | 482 Count | 4.11 VDC | 0 VDC |
| 1765307444 | 684 Count | 894 Count | 482 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)