This is the latest recevied telemetry packets stored in our database for station/object M7AQH-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BARO* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765340524 | 22.04 C | 62.96 % | 1628 hPa | 0 | 0 |
| 1765339924 | 22.07 C | 62.81 % | 1628 hPa | 0 | 0 |
| 1765339324 | 22.14 C | 62.77 % | 1628 hPa | 0 | 0 |
| 1765338724 | 22.19 C | 62.81 % | 1628 hPa | 0 | 0 |
| 1765338124 | 22.28 C | 62.71 % | 1628 hPa | 0 | 0 |
| 1765337524 | 22.27 C | 62.85 % | 1628 hPa | 0 | 0 |
| 1765336924 | 22.26 C | 62.67 % | 1628 hPa | 0 | 0 |
| 1765336324 | 22.29 C | 62.61 % | 1628 hPa | 0 | 0 |
| 1765335724 | 22.32 C | 62.3 % | 1628 hPa | 0 | 0 |
| 1765335028 | 22.43 C | 62.07 % | 1628 hPa | 0 | 0 |
| 1765334428 | 22.51 C | 61.81 % | 1628 hPa | 0 | 0 |
| 1765333831 | 22.5 C | 61.89 % | 1628 hPa | 0 | 0 |
| 1765333228 | 22.51 C | 61.95 % | 1628 hPa | 0 | 0 |
| 1765332630 | 22.54 C | 61.71 % | 1628 hPa | 0 | 0 |
| 1765332033 | 22.63 C | 61.82 % | 1628 hPa | 0 | 0 |
| 1765331428 | 22.63 C | 61.46 % | 1628 hPa | 0 | 0 |
| 1765330828 | 22.64 C | 61.59 % | 1628 hPa | 0 | 0 |
| 1765330228 | 22.64 C | 61.47 % | 1628 hPa | 0 | 0 |
| 1765329628 | 22.7 C | 61.04 % | 1628 hPa | 0 | 0 |
| 1765329028 | 22.81 C | 61 % | 1628 hPa | 0 | 0 |
| 1765328430 | 22.92 C | 61.28 % | 1628 hPa | 0 | 0 |
| 1765327831 | 22.93 C | 61.24 % | 1628 hPa | 0 | 0 |
| 1765327228 | 23.01 C | 61.12 % | 1628 hPa | 0 | 0 |
| 1765326630 | 23.06 C | 61.15 % | 1628 hPa | 0 | 0 |
| 1765326028 | 23.11 C | 60.96 % | 1628 hPa | 0 | 0 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.01, 0
BARO: 0, 0.1, 800
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)