This is the latest recevied telemetry packets stored in our database for station/object HS5TQA-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BAR* | BAT* | SAT* |
|---|---|---|---|---|---|
| 1765370407 | 31.64 °C | 64.8 %RH | 1011.9 hPa | 13.3 V | 27 |
| 1765369799 | 31.73 °C | 64.7 %RH | 1011.8 hPa | 13.3 V | 29 |
| 1765350642 | 32.38 °C | 72.6 %RH | 1010.2 hPa | 13.34 V | 31 |
| 1765344552 | 30.78 °C | 74.6 %RH | 1012.3 hPa | 13.4 V | 29 |
| 1765338466 | 28.93 °C | 75.5 %RH | 1014 hPa | 13.4 V | 32 |
| 1765326290 | 24.01 °C | 75.7 %RH | 1013.7 hPa | 13.23 V | 31 |
| 1765320203 | 24.45 °C | 75.1 %RH | 1012.7 hPa | 13.23 V | 31 |
| 1765314113 | 25.12 °C | 74.8 %RH | 1012.1 hPa | 13.23 V | 29 |
| 1765308026 | 26.02 °C | 73.8 %RH | 1012.1 hPa | 13.24 V | 30 |
| 1765295850 | 28.08 °C | 72.3 %RH | 1012.8 hPa | 13.3 V | 30 |
| 1765289763 | 28.79 °C | 72.5 %RH | 1013 hPa | 13.3 V | 29 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
BAR: 0, 0.1, 800
BAT: 0, 0.01, 0
SAT: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)