This is the latest recevied telemetry packets stored in our database for station/object KQ6DI-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | DC* | CPU* | Temp* | alt* | dB* |
|---|---|---|---|---|---|
| 1765410274 | 1193 | 37.6 | 71.4 | -225 | -98 |
| 1765409674 | 1194 | 37 | 70.8 | -225 | -98 |
| 1765409073 | 1194 | 37.6 | 70.7 | -224 | -98 |
| 1765408473 | 1193 | 37 | 71 | -224 | -98 |
| 1765407874 | 1193 | 37.6 | 71.5 | -227 | -98 |
| 1765407274 | 1194 | 37.6 | 71.9 | -228 | -98 |
| 1765406674 | 1193 | 37.6 | 71.3 | -230 | -98 |
| 1765406073 | 1193 | 37 | 70.8 | -230 | -98 |
| 1765405474 | 1193 | 37.6 | 70.9 | -231 | -98 |
| 1765404875 | 1193 | 37 | 71.2 | -232 | -98 |
| 1765404274 | 1194 | 37.6 | 71.7 | -233 | -98 |
| 1765403674 | 1193 | 38.6 | 71.8 | -234 | -32 |
| 1765403221 | 1192 | 38.6 | 71.9 | -235 | -33 |
| 1765403074 | 1193 | 38.6 | 72.1 | -235 | -33 |
| 1765402474 | 1192 | 39.2 | 71.8 | -238 | -32 |
| 1765402321 | 1193 | 38.6 | 71.6 | -239 | -33 |
| 1765401873 | 1192 | 39.2 | 71 | -240 | -33 |
| 1765401422 | 1193 | 38.6 | 71.2 | -243 | -32 |
| 1765401274 | 1192 | 38.6 | 71.2 | -245 | -32 |
| 1765400677 | 1192 | 38.6 | 71.3 | -247 | -31 |
| 1765400521 | 1192 | 39.2 | 71.3 | -247 | -32 |
| 1765400077 | 1192 | 39.2 | 71.6 | -250 | -32 |
| 1765399621 | 1192 | 38.6 | 71.8 | -251 | -31 |
| 1765399473 | 1193 | 39.7 | 71.8 | -253 | -31 |
| 1765398876 | 1192 | 39.2 | 72.2 | -259 | -32 |
*Used Equation Coefficients:
DC: 0, 1, 1000
CPU: 0, 0.1, 0
Temp: 0, 0.1, 0
alt: 0, 1, -1000
dB: 0, -1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)