This is the latest recevied telemetry packets stored in our database for station/object SANJUANWL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765355404 | 1124 | 0 | 0 | 0 | 0 |
| 1765354804 | 1123 | 0 | 0 | 0 | 0 |
| 1765354204 | 1123 | 0 | 0 | 0 | 0 |
| 1765353604 | 1122 | 0 | 0 | 0 | 0 |
| 1765353007 | 1122 | 0 | 0 | 0 | 0 |
| 1765352405 | 1121 | 0 | 0 | 0 | 0 |
| 1765351804 | 1119 | 0 | 0 | 0 | 0 |
| 1765351205 | 1118 | 0 | 0 | 0 | 0 |
| 1765350605 | 1117 | 0 | 0 | 0 | 0 |
| 1765350004 | 1116 | 0 | 0 | 0 | 0 |
| 1765349404 | 1116 | 0 | 0 | 0 | 0 |
| 1765348804 | 1115 | 0 | 0 | 0 | 0 |
| 1765348204 | 1114 | 0 | 0 | 0 | 0 |
| 1765347606 | 1113 | 0 | 0 | 0 | 0 |
| 1765347004 | 1112 | 0 | 0 | 0 | 0 |
| 1765346407 | 1111 | 0 | 0 | 0 | 0 |
| 1765345804 | 1110 | 0 | 0 | 0 | 0 |
| 1765345206 | 1110 | 0 | 0 | 0 | 0 |
| 1765344607 | 1109 | 0 | 0 | 0 | 0 |
| 1765344008 | 1108 | 0 | 0 | 0 | 0 |
| 1765343404 | 1108 | 0 | 0 | 0 | 0 |
| 1765342807 | 1108 | 0 | 0 | 0 | 0 |
| 1765342204 | 1107 | 0 | 0 | 0 | 0 |
| 1765341608 | 1107 | 0 | 0 | 0 | 0 |
| 1765341006 | 1106 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)