This is the latest recevied telemetry packets stored in our database for station/object SA3MHZ-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765321481 | 23.1 C | 19.06 % | 1002.88 | 0 | 0 |
| 1765317877 | 31.4 C | 18.86 % | 1005.13 | 0 | 0 |
| 1765317847 | 31.4 C | 18.86 % | 1003.25 | 0 | 0 |
| 1765317819 | 31.4 C | 19.12 % | 1005.38 | 0 | 0 |
| 1765317786 | 31.4 C | 19.12 % | 1004.13 | 0 | 0 |
| 1765317770 | 31.4 C | 19.12 % | 1003.13 | 0 | 0 |
| 1765317754 | 31.4 C | 19.24 % | 1005.75 | 0 | 0 |
| 1765317732 | 31.4 C | 19.24 % | 1004.63 | 0 | 0 |
| 1765317263 | 30.4 C | 20.41 % | 1003.5 | 0 | 0 |
| 1765317236 | 30.4 C | 20.41 % | 1003.88 | 0 | 0 |
| 1765317219 | 30.4 C | 20.41 % | 1002.5 | 0 | 0 |
| 1765317127 | 30 C | 20.48 % | 1003.88 | 0 | 0 |
| 1765317088 | 29.9 C | 20.74 % | 1003.75 | 0 | 0 |
| 1765317055 | 29.9 C | 20.74 % | 1003.88 | 0 | 0 |
| 1765316982 | 29.9 C | 20.35 % | 1004.38 | 0 | 0 |
| 1765316899 | 29.7 C | 20.52 % | 1009.5 | 0 | 0 |
| 1765316469 | 26.6 C | 21.78 % | 1003.63 | 0 | 0 |
| 1765314855 | 31.6 C | 19.92 % | 1003.63 | 0 | 0 |
| 1765314839 | 31.6 C | 19.92 % | 1004 | 0 | 0 |
| 1765314791 | 31.6 C | 20.21 % | 1004.5 | 0 | 0 |
| 1765314769 | 31.6 C | 20.15 % | 1004.75 | 0 | 0 |
| 1765314658 | 31.5 C | 20.17 % | 1004 | 0 | 0 |
| 1765314627 | 31.4 C | 20.46 % | 1006.5 | 0 | 0 |
| 1765314385 | 30.9 C | 20.52 % | 1002.25 | 0 | 0 |
| 1765314368 | 30.9 C | 20.52 % | 1003.75 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)