This is the latest recevied telemetry packets stored in our database for station/object OK2ZAW-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765358504 | 2.85 VDC | 0 | 0 | 0 | 0 |
| 1765357603 | 2.88 VDC | 0 | 0 | 0 | 0 |
| 1765356719 | 2.91 VDC | 0 | 0 | 0 | 0 |
| 1765355802 | 2.96 VDC | 0 | 0 | 0 | 0 |
| 1765330721 | 2.76 VDC | 0 | 0 | 0 | 0 |
| 1765329799 | 2.8 VDC | 0 | 0 | 0 | 0 |
| 1765328898 | 2.82 VDC | 0 | 0 | 0 | 0 |
| 1765327998 | 2.79 VDC | 0 | 0 | 0 | 0 |
| 1765327097 | 2.81 VDC | 0 | 0 | 0 | 0 |
| 1765326197 | 2.82 VDC | 0 | 0 | 0 | 0 |
| 1765325296 | 2.84 VDC | 0 | 0 | 0 | 0 |
| 1765324395 | 2.85 VDC | 0 | 0 | 0 | 0 |
| 1765323479 | 2.87 VDC | 0 | 0 | 0 | 0 |
| 1765322579 | 2.89 VDC | 0 | 0 | 0 | 0 |
| 1765321678 | 2.92 VDC | 0 | 0 | 0 | 0 |
| 1765320777 | 2.92 VDC | 0 | 0 | 0 | 0 |
| 1765319877 | 2.96 VDC | 0 | 0 | 0 | 0 |
| 1765318976 | 2.98 VDC | 0 | 0 | 0 | 0 |
| 1765318079 | 3 VDC | 0 | 0 | 0 | 0 |
| 1765317175 | 3.01 VDC | 0 | 0 | 0 | 0 |
| 1765316275 | 3.03 VDC | 0 | 0 | 0 | 0 |
| 1765315374 | 3.04 VDC | 0 | 0 | 0 | 0 |
| 1765314474 | 3 VDC | 0 | 0 | 0 | 0 |
| 1765313563 | 3.07 VDC | 0 | 0 | 0 | 0 |
| 1765312663 | 3.09 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)