K0FTT Automobiles

My position About ☰

reset

9M2FUL-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M2FUL-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	TEMP*	HUM*	BARO*	BAT*	SAT*
1766823591	33.43 C	46 %	1002 hPa	2.52 Volt	24 Sat
1766823574	33.47 C	46 %	1001 hPa	2.53 Volt	19 Sat
1766823557	33.5 C	46 %	1001 hPa	2.53 Volt	23 Sat
1766823546	33.52 C	46 %	1001 hPa	2.54 Volt	22 Sat
1766823523	33.56 C	47 %	1001 hPa	2.56 Volt	18 Sat
1766823506	33.56 C	46 %	1001 hPa	2.57 Volt	21 Sat
1766823489	33.59 C	47 %	1001 hPa	2.59 Volt	22 Sat
1766823472	33.61 C	46 %	1001 hPa	2.59 Volt	22 Sat
1766823461	33.63 C	46 %	1001 hPa	2.59 Volt	20 Sat
1766823438	33.65 C	46 %	1000 hPa	2.61 Volt	16 Sat
1766823427	33.68 C	46 %	998 hPa	2.61 Volt	21 Sat
1766823404	33.7 C	46 %	998 hPa	2.65 Volt	17 Sat
1766823393	33.72 C	46 %	998 hPa	2.64 Volt	15 Sat
1766823281	33.84 C	46 %	998 hPa	2.66 Volt	20 Sat
1766823263	33.77 C	46 %	994 hPa	2.68 Volt	41 Sat
1766823252	33.77 C	46 %	994 hPa	2.59 Volt	38 Sat
1766823243	33.79 C	46 %	994 hPa	2.59 Volt	38 Sat
1766823203	33.83 C	46 %	992 hPa	2.74 Volt	39 Sat
1766823182	33.86 C	46 %	991 hPa	2.74 Volt	35 Sat
1766823174	33.86 C	46 %	991 hPa	2.74 Volt	35 Sat
1766823085	33.95 C	46 %	986 hPa	2.79 Volt	36 Sat
1766822555	34.24 C	47 %	948 hPa	3.01 Volt	35 Sat
1766819589	35.63 C	45 %	998 hPa	3.37 Volt	32 Sat
1766819556	35.68 C	45 %	999 hPa	3.37 Volt	34 Sat
1766819523	35.75 C	45 %	1000 hPa	3.37 Volt	38 Sat

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 1, 0

BARO: 0, 1, 0

BAT: 0, 0.01, 0

SAT: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)