This is the latest recevied telemetry packets stored in our database for station/object SP3IZN-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1767215718 | 254 | 7 | 156 | 0 | 0 |
| 1767215502 | 249 | 6 | 212 | 0 | 0 |
| 1767215080 | 245 | 6 | 313 | 0 | 0 |
| 1767214699 | 237 | 6 | 422 | 0 | 0 |
| 1767214509 | 235 | 6 | 482 | 0 | 0 |
| 1767214319 | 233 | 5 | 540 | 0 | 0 |
| 1767214128 | 231 | 6 | 609 | 0 | 0 |
| 1767213938 | 229 | 6 | 695 | 0 | 0 |
| 1767213748 | 228 | 6 | 778 | 0 | 0 |
| 1767213557 | 225 | 6 | 852 | 0 | 0 |
| 1767213367 | 226 | 6 | 937 | 0 | 0 |
| 1767213177 | 227 | 6 | 1025 | 0 | 0 |
| 1767212986 | 226 | 6 | 1114 | 0 | 0 |
| 1767212796 | 228 | 6 | 1203 | 0 | 0 |
| 1767212605 | 228 | 7 | 1311 | 0 | 0 |
| 1767212415 | 228 | 7 | 1442 | 0 | 0 |
| 1767212224 | 229 | 7 | 1564 | 0 | 0 |
| 1767212034 | 231 | 6 | 1730 | 0 | 0 |
| 1767211843 | 229 | 7 | 1895 | 0 | 0 |
| 1767211651 | 230 | 7 | 2147 | 0 | 0 |
| 1767211459 | 231 | 7 | 2292 | 0 | 0 |
| 1767211268 | 233 | 7 | 2232 | 0 | 0 |
| 1767211077 | 238 | 8 | 2174 | 0 | 0 |
| 1767210887 | 236 | 8 | 2098 | 0 | 0 |
| 1767210697 | 235 | 7 | 2053 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)