This is the latest recevied telemetry packets stored in our database for station/object EA5DHO-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765457288 | 0 Count | 128 Count | 0 Count | 0 VDC | 0 VDC |
| 1765456087 | 0 Count | 106 Count | 0 Count | 0 VDC | 0 VDC |
| 1765454887 | 0 Count | 96 Count | 0 Count | 0 VDC | 0 VDC |
| 1765453687 | 0 Count | 76 Count | 0 Count | 0 VDC | 0 VDC |
| 1765452487 | 0 Count | 71 Count | 0 Count | 0 VDC | 0 VDC |
| 1765451538 | 0 Count | 861 Count | 0 Count | 0 VDC | 0 VDC |
| 1765450338 | 0 Count | 859 Count | 0 Count | 0 VDC | 0 VDC |
| 1765449609 | 0 Count | 71 Count | 0 Count | 0 VDC | 0 VDC |
| 1765448409 | 0 Count | 39 Count | 0 Count | 0 VDC | 0 VDC |
| 1765447208 | 0 Count | 1008 Count | 0 Count | 0 VDC | 0 VDC |
| 1765446008 | 0 Count | 982 Count | 0 Count | 0 VDC | 0 VDC |
| 1765444808 | 0 Count | 939 Count | 0 Count | 0 VDC | 0 VDC |
| 1765443608 | 0 Count | 918 Count | 0 Count | 0 VDC | 0 VDC |
| 1765442408 | 0 Count | 906 Count | 0 Count | 0 VDC | 0 VDC |
| 1765441208 | 0 Count | 896 Count | 0 Count | 0 VDC | 0 VDC |
| 1765440008 | 0 Count | 887 Count | 0 Count | 0 VDC | 0 VDC |
| 1765438808 | 0 Count | 880 Count | 0 Count | 0 VDC | 0 VDC |
| 1765437608 | 0 Count | 850 Count | 0 Count | 0 VDC | 0 VDC |
| 1765436408 | 0 Count | 836 Count | 0 Count | 0 VDC | 0 VDC |
| 1765435208 | 0 Count | 814 Count | 0 Count | 0 VDC | 0 VDC |
| 1765434008 | 0 Count | 807 Count | 0 Count | 0 VDC | 0 VDC |
| 1765432808 | 0 Count | 807 Count | 0 Count | 0 VDC | 0 VDC |
| 1765431608 | 0 Count | 801 Count | 0 Count | 0 VDC | 0 VDC |
| 1765430408 | 0 Count | 799 Count | 0 Count | 0 VDC | 0 VDC |
| 1765429207 | 0 Count | 799 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)