This is the latest recevied telemetry packets stored in our database for station/object SP8KZI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766515796 | 645 Count | 746 Count | 175 Count | 0 VDC | 0.08 VDC |
| 1766514894 | 642 Count | 742 Count | 173 Count | 0 VDC | 0.08 VDC |
| 1766513993 | 639 Count | 738 Count | 171 Count | 0 VDC | 0.08 VDC |
| 1766513092 | 637 Count | 734 Count | 170 Count | 0 VDC | 0.08 VDC |
| 1766512190 | 634 Count | 729 Count | 168 Count | 0 VDC | 0.08 VDC |
| 1766511289 | 630 Count | 724 Count | 166 Count | 0 VDC | 0.08 VDC |
| 1766510420 | 624 Count | 718 Count | 164 Count | 0 VDC | 0.08 VDC |
| 1766509519 | 620 Count | 708 Count | 161 Count | 0 VDC | 0.08 VDC |
| 1766508617 | 611 Count | 692 Count | 153 Count | 0 VDC | 0.08 VDC |
| 1766507716 | 604 Count | 680 Count | 147 Count | 0 VDC | 0.08 VDC |
| 1766506814 | 597 Count | 671 Count | 141 Count | 0 VDC | 0.08 VDC |
| 1766505913 | 595 Count | 668 Count | 140 Count | 0 VDC | 0.08 VDC |
| 1766505012 | 592 Count | 664 Count | 138 Count | 0 VDC | 0.08 VDC |
| 1766504110 | 589 Count | 660 Count | 136 Count | 0 VDC | 0.08 VDC |
| 1766503209 | 587 Count | 656 Count | 135 Count | 0 VDC | 0.08 VDC |
| 1766502307 | 584 Count | 652 Count | 133 Count | 0 VDC | 0.08 VDC |
| 1766501406 | 582 Count | 649 Count | 132 Count | 0 VDC | 0.08 VDC |
| 1766500504 | 581 Count | 648 Count | 132 Count | 0 VDC | 0.08 VDC |
| 1766499603 | 580 Count | 646 Count | 132 Count | 0 VDC | 0.08 VDC |
| 1766498702 | 578 Count | 640 Count | 131 Count | 0 VDC | 0.08 VDC |
| 1766497800 | 576 Count | 637 Count | 130 Count | 0 VDC | 0.08 VDC |
| 1766496899 | 575 Count | 636 Count | 130 Count | 0 VDC | 0.08 VDC |
| 1766495997 | 572 Count | 632 Count | 128 Count | 0 VDC | 0.08 VDC |
| 1766495096 | 569 Count | 627 Count | 126 Count | 0 VDC | 0.08 VDC |
| 1766494195 | 567 Count | 625 Count | 125 Count | 0 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)