This is the latest recevied telemetry packets stored in our database for station/object DG0JN-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Ubat* | TxPwr* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765460322 | 8 degC | 4.01 V | 0 dBm | 0 | 0 |
| 1765460020 | 8 degC | 4.01 V | 7 dBm | 0 | 0 |
| 1765459715 | 8 degC | 3.99 V | 1 dBm | 0 | 0 |
| 1765459413 | 8 degC | 4.01 V | 7 dBm | 0 | 0 |
| 1765458507 | 8 degC | 4 V | 3 dBm | 0 | 0 |
| 1765458206 | 8 degC | 4 V | 7 dBm | 0 | 0 |
| 1765457904 | 8 degC | 4 V | 4 dBm | 0 | 0 |
| 1765457601 | 7.7 degC | 4 V | 7 dBm | 0 | 0 |
| 1765457295 | 8 degC | 4 V | 5 dBm | 0 | 0 |
| 1765456993 | 8 degC | 4.01 V | 7 dBm | 0 | 0 |
| 1765456691 | 8 degC | 4 V | 6 dBm | 0 | 0 |
| 1765456087 | 8.2 degC | 4 V | 0 dBm | 0 | 0 |
| 1765455785 | 8.2 degC | 4.01 V | 7 dBm | 0 | 0 |
| 1765455483 | 8.2 degC | 4.02 V | 1 dBm | 0 | 0 |
| 1765455181 | 8 degC | 4 V | 7 dBm | 0 | 0 |
| 1765454878 | 8.2 degC | 4.01 V | 2 dBm | 0 | 0 |
| 1765454576 | 8 degC | 4.01 V | 7 dBm | 0 | 0 |
| 1765453972 | 8.2 degC | 3.99 V | 7 dBm | 0 | 0 |
| 1765453670 | 8 degC | 4 V | 4 dBm | 0 | 0 |
| 1765453368 | 8 degC | 3.99 V | 7 dBm | 0 | 0 |
| 1765453066 | 8 degC | 4.01 V | 5 dBm | 0 | 0 |
| 1765452764 | 7.7 degC | 4.01 V | 7 dBm | 0 | 0 |
| 1765451857 | 8 degC | 4 V | 0 dBm | 0 | 0 |
| 1765451555 | 7.7 degC | 3.99 V | 7 dBm | 0 | 0 |
| 1765451253 | 7.7 degC | 4.01 V | 1 dBm | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, -273
Ubat: 0, 0.001, 0
TxPwr: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)