This is the latest recevied telemetry packets stored in our database for station/object 9W2MMT-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765343957 | 4.31 VDC | 0 | 0 | 0 | 0 |
| 1765343918 | 4.58 VDC | 0 | 0 | 0 | 0 |
| 1765343862 | 4.29 VDC | 0 | 0 | 0 | 0 |
| 1765343820 | 4.48 VDC | 0 | 0 | 0 | 0 |
| 1765343631 | 4.73 VDC | 0 | 0 | 0 | 0 |
| 1765343531 | 4.85 VDC | 0 | 0 | 0 | 0 |
| 1765343483 | 4.76 VDC | 0 | 0 | 0 | 0 |
| 1765343444 | 5.1 VDC | 0 | 0 | 0 | 0 |
| 1765343235 | 4.54 VDC | 0 | 0 | 0 | 0 |
| 1765343196 | 4.89 VDC | 0 | 0 | 0 | 0 |
| 1765343147 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1765343009 | 5.02 VDC | 0 | 0 | 0 | 0 |
| 1765342900 | 4.38 VDC | 0 | 0 | 0 | 0 |
| 1765342755 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1765342716 | 4.94 VDC | 0 | 0 | 0 | 0 |
| 1765342668 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1765342559 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1765342372 | 4.4 VDC | 0 | 0 | 0 | 0 |
| 1765342141 | 4.96 VDC | 0 | 0 | 0 | 0 |
| 1765341912 | 4.92 VDC | 0 | 0 | 0 | 0 |
| 1765340739 | 4.58 VDC | 0 | 0 | 0 | 0 |
| 1765340596 | 4.41 VDC | 0 | 0 | 0 | 0 |
| 1765340444 | 4.69 VDC | 0 | 0 | 0 | 0 |
| 1765340399 | 4.42 VDC | 0 | 0 | 0 | 0 |
| 1765340356 | 4.65 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)