This is the latest recevied telemetry packets stored in our database for station/object OK2ILA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765299347 | 8.7 C | 8161 | 0 | 0 | 0 |
| 1765298444 | 8.7 C | 8142 | 0 | 0 | 0 |
| 1765297541 | 8.8 C | 8135 | 0 | 0 | 0 |
| 1765296638 | 8.9 C | 8151 | 0 | 0 | 0 |
| 1765295735 | 9 C | 8145 | 0 | 0 | 0 |
| 1765294833 | 9.2 C | 8121 | 0 | 0 | 0 |
| 1765293929 | 9.6 C | 8188 | 0 | 0 | 0 |
| 1765293026 | 10.1 C | 8168 | 0 | 0 | 0 |
| 1765292123 | 10.8 C | 8168 | 0 | 0 | 0 |
| 1765291220 | 11.6 C | 8151 | 0 | 0 | 0 |
| 1765291151 | 11.6 C | 8144 | 0 | 0 | 0 |
| 1765291132 | 11.4 C | 8142 | 0 | 0 | 0 |
| 1765291115 | 11.4 C | 8148 | 0 | 0 | 0 |
| 1765291087 | 11.4 C | 8154 | 0 | 0 | 0 |
| 1765291072 | 11.2 C | 8155 | 0 | 0 | 0 |
| 1765291037 | 11.2 C | 8152 | 0 | 0 | 0 |
| 1765291022 | 11.2 C | 8150 | 0 | 0 | 0 |
| 1765290955 | 10.9 C | 8153 | 0 | 0 | 0 |
| 1765290940 | 10.7 C | 8157 | 0 | 0 | 0 |
| 1765290914 | 10.7 C | 8156 | 0 | 0 | 0 |
| 1765290861 | 10.5 C | 8143 | 0 | 0 | 0 |
| 1765290846 | 10.5 C | 8146 | 0 | 0 | 0 |
| 1765290816 | 10.3 C | 8143 | 0 | 0 | 0 |
| 1765290801 | 10.3 C | 8149 | 0 | 0 | 0 |
| 1765290792 | 10.3 C | 8156 | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)