This is the latest recevied telemetry packets stored in our database for station/object LZ1NAG-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765546629 | 13.9 C | 60.9 % | 1028.88 hPa | 0 | 0 |
| 1765541172 | 23.3 C | 43.83 % | 1029.75 hPa | 0 | 0 |
| 1765540958 | 22.7 C | 44.95 % | 1030 hPa | 0 | 0 |
| 1765540701 | 21.3 C | 47.62 % | 1028.63 hPa | 0 | 0 |
| 1765539267 | 21.2 C | 49.08 % | 1026.88 hPa | 0 | 0 |
| 1765538915 | 19.1 C | 51.81 % | 1027.13 hPa | 0 | 0 |
| 1765538590 | 13.7 C | 61.64 % | 1023.88 hPa | 0 | 0 |
| 1765538420 | 10.7 C | 65.35 % | 1028.25 hPa | 0 | 0 |
| 1765536034 | 13 C | 61.1 % | 1031.38 hPa | 0 | 0 |
| 1765527003 | 13.6 C | 61.6 % | 1029.75 hPa | 0 | 0 |
| 1765522278 | 20.5 C | 47.02 % | 1028.25 hPa | 0 | 0 |
| 1765522112 | 19.8 C | 48.44 % | 1029 hPa | 0 | 0 |
| 1765521819 | 17 C | 53.8 % | 1030.13 hPa | 0 | 0 |
| 1765521650 | 14.6 C | 58.16 % | 1027.25 hPa | 0 | 0 |
| 1765519214 | 18.7 C | 51.31 % | 1026.38 hPa | 0 | 0 |
| 1765519073 | 17.5 C | 53.18 % | 1027.38 hPa | 0 | 0 |
| 1765518888 | 16 C | 55.75 % | 1028.5 hPa | 0 | 0 |
| 1765518726 | 13.7 C | 59.06 % | 1029.63 hPa | 0 | 0 |
| 1765518540 | 9.4 C | 70.01 % | 1027.25 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)