This is the latest recevied telemetry packets stored in our database for station/object KF6YGK-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765398080 | 12.16 Volts | 77.4 Deg.F | 0 | 0 | 0 |
| 1765396286 | 12.19 Volts | 76.52 Deg.F | 0 | 0 | 0 |
| 1765394492 | 12.19 Volts | 76.52 Deg.F | 0 | 0 | 0 |
| 1765392699 | 12.19 Volts | 76.52 Deg.F | 0 | 0 | 0 |
| 1765390906 | 12.31 Volts | 72.12 Deg.F | 0 | 0 | 0 |
| 1765385527 | 12.42 Volts | 63.34 Deg.F | 0 | 0 | 0 |
| 1765380151 | 12.69 Volts | 60.7 Deg.F | 0 | 0 | 0 |
| 1765360434 | 12.57 Volts | 63.34 Deg.F | 0 | 0 | 0 |
| 1765358641 | 12.51 Volts | 64.21 Deg.F | 0 | 0 | 0 |
| 1765355055 | 12.72 Volts | 63.34 Deg.F | 0 | 0 | 0 |
| 1765342508 | 12.6 Volts | 64.21 Deg.F | 0 | 0 | 0 |
| 1765338923 | 12.57 Volts | 65.09 Deg.F | 0 | 0 | 0 |
| 1765331751 | 12.48 Volts | 68.61 Deg.F | 0 | 0 | 0 |
| 1765329958 | 12.48 Volts | 70.37 Deg.F | 0 | 0 | 0 |
| 1765326371 | 13.04 Volts | 75.64 Deg.F | 0 | 0 | 0 |
| 1765324578 | 13.04 Volts | 77.4 Deg.F | 0 | 0 | 0 |
| 1765322784 | 13.07 Volts | 78.28 Deg.F | 0 | 0 | 0 |
| 1765319196 | 12.77 Volts | 77.4 Deg.F | 0 | 0 | 0 |
| 1765315609 | 12.92 Volts | 76.52 Deg.F | 0 | 0 | 0 |
| 1765312021 | 13.57 Volts | 75.64 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.879, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)