This is the latest recevied telemetry packets stored in our database for station/object KG5BQX-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765324330 | 425 | 620 | 267 | 0 | 0 |
| 1765324149 | 465 | 620 | 270 | 0 | 0 |
| 1765324120 | 466 | 620 | 267 | 0 | 0 |
| 1765324071 | 466 | 620 | 269 | 0 | 0 |
| 1765324050 | 467 | 619 | 268 | 0 | 0 |
| 1765324045 | 465 | 619 | 267 | 0 | 0 |
| 1765323806 | 470 | 618 | 270 | 0 | 0 |
| 1765323756 | 472 | 618 | 269 | 0 | 0 |
| 1765323697 | 466 | 618 | 268 | 0 | 0 |
| 1765323626 | 468 | 618 | 272 | 0 | 0 |
| 1765323435 | 469 | 617 | 271 | 0 | 0 |
| 1765323323 | 475 | 617 | 271 | 0 | 0 |
| 1765323179 | 479 | 616 | 272 | 0 | 0 |
| 1765323057 | 485 | 615 | 274 | 0 | 0 |
| 1765322965 | 491 | 613 | 272 | 0 | 0 |
| 1765322875 | 490 | 611 | 276 | 0 | 0 |
| 1765322870 | 492 | 611 | 275 | 0 | 0 |
| 1765322827 | 487 | 610 | 276 | 0 | 0 |
| 1765299147 | 492 | 579 | 298 | 0 | 0 |
| 1765262403 | 479 | 589 | 291 | 0 | 0 |
| 1765262356 | 484 | 588 | 408 | 0 | 0 |
| 1765262351 | 480 | 588 | 292 | 0 | 0 |
| 1765262322 | 482 | 588 | 290 | 0 | 0 |
| 1765262232 | 482 | 587 | 290 | 0 | 0 |
| 1765262117 | 483 | 586 | 294 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)