This is the latest recevied telemetry packets stored in our database for station/object KD0AWK-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Solar* | Temp* | Sats* | Lock* | Value5* |
|---|---|---|---|---|---|
| 1765299740 | 4.56 Volts | 18 Deg C | 6 | 1 | 1 |
| 1765299631 | 4.5 Volts | 21 Deg C | 6 | 1 | 1 |
| 1765299496 | 4.58 Volts | 17 Deg C | 6 | 1 | 1 |
| 1765299376 | 4.34 Volts | 10 Deg C | 6 | 1 | 1 |
| 1765299256 | 4.36 Volts | 10 Deg C | 6 | 1 | 1 |
| 1765299137 | 4.48 Volts | 12 Deg C | 6 | 1 | 1 |
| 1765299016 | 4.42 Volts | 12 Deg C | 6 | 1 | 1 |
| 1765298896 | 4.4 Volts | 13 Deg C | 6 | 1 | 1 |
| 1765298776 | 4.42 Volts | 10 Deg C | 6 | 1 | 1 |
| 1765298656 | 4.1 Volts | 7 Deg C | 6 | 1 | 1 |
| 1765298536 | 4.16 Volts | 7 Deg C | 6 | 1 | 1 |
| 1765298416 | 4.66 Volts | 6 Deg C | 6 | 1 | 1 |
| 1765298296 | 4.62 Volts | 6 Deg C | 6 | 1 | 1 |
| 1765298176 | 4.66 Volts | 5 Deg C | 6 | 1 | 1 |
| 1765298056 | 4.64 Volts | 7 Deg C | 6 | 6 | 1 |
| 1765297936 | 4.66 Volts | 6 Deg C | 6 | 1 | 1 |
| 1765297816 | 4.68 Volts | 6 Deg C | 6 | 1 | 1 |
| 1765297696 | 4.52 Volts | 9 Deg C | 6 | 1 | 1 |
*Used Equation Coefficients:
Solar: 0, 0.01, 0
Temp: 0, 1, -273
Sats: 0, 1, 0
Lock: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)