This is the latest recevied telemetry packets stored in our database for station/object HB9TVP-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765359822 | 858 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765358021 | 857 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765356221 | 856 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765354420 | 855 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765352619 | 854 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765350825 | 853 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765349024 | 852 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765347224 | 851 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765345423 | 850 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765343622 | 849 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765341821 | 848 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765340021 | 847 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765338220 | 846 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765336419 | 845 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765334619 | 844 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765332818 | 843 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765331017 | 842 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765329822 | 841 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765328021 | 840 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765326220 | 839 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765324420 | 838 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765322619 | 837 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765320818 | 836 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765319017 | 835 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765317217 | 834 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)