This is the latest recevied telemetry packets stored in our database for station/object G3CWI-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765376917 | 14.76 VDC | 0 | 0 | 0 | 0 |
| 1765373317 | 14.74 VDC | 0 | 0 | 0 | 0 |
| 1765369717 | 14.22 VDC | 0 | 0 | 0 | 0 |
| 1765366117 | 10.98 VDC | 0 | 0 | 0 | 0 |
| 1765362517 | 11.24 VDC | 0 | 0 | 0 | 0 |
| 1765360897 | 11.06 VDC | 0 | 0 | 0 | 0 |
| 1765357419 | 10.26 VDC | 0 | 0 | 0 | 0 |
| 1765353818 | 9.84 VDC | 0 | 0 | 0 | 0 |
| 1765350218 | 9.82 VDC | 0 | 0 | 0 | 0 |
| 1765346678 | 9.84 VDC | 0 | 0 | 0 | 0 |
| 1765345776 | 9.8 VDC | 0 | 0 | 0 | 0 |
| 1765342176 | 9.82 VDC | 0 | 0 | 0 | 0 |
| 1765338576 | 9.86 VDC | 0 | 0 | 0 | 0 |
| 1765336868 | 9.84 VDC | 0 | 0 | 0 | 0 |
| 1765333267 | 9.86 VDC | 0 | 0 | 0 | 0 |
| 1765333055 | 9.86 VDC | 0 | 0 | 0 | 0 |
| 1765330445 | 9.86 VDC | 0 | 0 | 0 | 0 |
| 1765327805 | 9.86 VDC | 0 | 0 | 0 | 0 |
| 1765324987 | 9.88 VDC | 0 | 0 | 0 | 0 |
| 1765321537 | 9.9 VDC | 0 | 0 | 0 | 0 |
| 1765321327 | 9.9 VDC | 0 | 0 | 0 | 0 |
| 1765320515 | 9.88 VDC | 0 | 0 | 0 | 0 |
| 1765316915 | 9.94 VDC | 0 | 0 | 0 | 0 |
| 1765313884 | 9.94 VDC | 0 | 0 | 0 | 0 |
| 1765310554 | 9.92 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)