This is the latest recevied telemetry packets stored in our database for station/object EA4AOJ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Pressure* | Satellite* | HDOP* | Value5* |
|---|---|---|---|---|---|
| 1765392042 | 21 | 948 | 10 | 0 | 0 |
| 1765392002 | 21 | 948 | 10 | 0 | 0 |
| 1765391960 | 21 | 947 | 10 | 1 | 0 |
| 1765391855 | 21 | 947 | 9 | 1 | 0 |
| 1765391847 | 21 | 947 | 10 | 1 | 0 |
| 1765391839 | 21 | 947 | 9 | 1 | 0 |
| 1765391831 | 21 | 947 | 9 | 1 | 0 |
| 1765391795 | 21 | 947 | 9 | 1 | 0 |
| 1765390414 | 6 | 945 | 6 | 1 | 0 |
| 1765390378 | 6 | 945 | 5 | 3 | 0 |
| 1765390344 | 5 | 946 | 5 | 3 | 0 |
| 1765390332 | 5 | 946 | 5 | 3 | 0 |
| 1765390283 | 4 | 946 | 5 | 3 | 0 |
| 1765390240 | 4 | 946 | 5 | 3 | 0 |
| 1765390223 | 4 | 946 | 5 | 3 | 0 |
| 1765390163 | 3 | 946 | 3 | 5 | 0 |
| 1765354115 | 18 | 945 | 11 | 0 | 0 |
| 1765354104 | 18 | 946 | 10 | 0 | 0 |
| 1765354096 | 18 | 946 | 10 | 0 | 0 |
| 1765354085 | 18 | 946 | 11 | 1 | 0 |
| 1765353984 | 17 | 946 | 11 | 0 | 0 |
| 1765353950 | 17 | 946 | 11 | 1 | 0 |
| 1765353917 | 17 | 946 | 11 | 1 | 0 |
| 1765353884 | 17 | 945 | 11 | 1 | 0 |
| 1765353876 | 17 | 945 | 11 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Pressure: 0, 1, 0
Satellite: 0, 1, 0
HDOP: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)