This is the latest recevied telemetry packets stored in our database for station/object SP8AA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765921014 | 427 Count | 423 Count | 290 Count | 3.69 VDC | 0.14 VDC |
| 1765920090 | 422 Count | 415 Count | 286 Count | 3.69 VDC | 0.14 VDC |
| 1765919178 | 417 Count | 409 Count | 282 Count | 3.7 VDC | 0.14 VDC |
| 1765918260 | 411 Count | 401 Count | 277 Count | 3.69 VDC | 0.14 VDC |
| 1765917347 | 404 Count | 395 Count | 271 Count | 3.7 VDC | 0.14 VDC |
| 1765916435 | 398 Count | 389 Count | 266 Count | 3.71 VDC | 0.14 VDC |
| 1765916376 | 401 Count | 398 Count | 273 Count | 3.71 VDC | 0.14 VDC |
| 1765915451 | 393 Count | 389 Count | 266 Count | 3.71 VDC | 0.14 VDC |
| 1765914527 | 387 Count | 380 Count | 261 Count | 3.71 VDC | 0.14 VDC |
| 1765914468 | 389 Count | 387 Count | 267 Count | 3.72 VDC | 0.14 VDC |
| 1765913554 | 382 Count | 380 Count | 261 Count | 3.71 VDC | 0.14 VDC |
| 1765912637 | 376 Count | 371 Count | 256 Count | 3.72 VDC | 0.14 VDC |
| 1765911726 | 372 Count | 365 Count | 253 Count | 3.72 VDC | 0.14 VDC |
| 1765910810 | 368 Count | 358 Count | 250 Count | 3.72 VDC | 0.14 VDC |
| 1765909899 | 361 Count | 351 Count | 244 Count | 3.74 VDC | 0.14 VDC |
| 1765908984 | 358 Count | 346 Count | 242 Count | 3.73 VDC | 0.14 VDC |
| 1765908066 | 354 Count | 340 Count | 239 Count | 3.74 VDC | 0.14 VDC |
| 1765908007 | 356 Count | 349 Count | 245 Count | 3.75 VDC | 0.14 VDC |
| 1765907075 | 349 Count | 340 Count | 239 Count | 3.75 VDC | 0.14 VDC |
| 1765906164 | 344 Count | 334 Count | 235 Count | 3.75 VDC | 0.14 VDC |
| 1765905253 | 338 Count | 325 Count | 230 Count | 3.76 VDC | 0.14 VDC |
| 1765905194 | 341 Count | 335 Count | 237 Count | 3.76 VDC | 0.14 VDC |
| 1765904281 | 333 Count | 325 Count | 230 Count | 3.75 VDC | 0.14 VDC |
| 1765903368 | 325 Count | 313 Count | 223 Count | 3.77 VDC | 0.14 VDC |
| 1765902451 | 317 Count | 305 Count | 216 Count | 3.75 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)