This is the latest recevied telemetry packets stored in our database for station/object KQ6DI-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | DC* | PC Board* | Ambient* | upper* | lower* |
|---|---|---|---|---|---|
| 1765375566 | 233 | 721 | 656 | 481 | 476 |
| 1765373764 | 230 | 714 | 652 | 479 | 472 |
| 1765371967 | 235 | 717 | 654 | 479 | 476 |
| 1765370164 | 233 | 721 | 656 | 484 | 481 |
| 1765368368 | 235 | 710 | 651 | 476 | 474 |
| 1765366564 | 233 | 712 | 653 | 475 | 474 |
| 1765364767 | 236 | 714 | 655 | 479 | 473 |
| 1765362964 | 236 | 717 | 658 | 480 | 475 |
| 1765361167 | 233 | 718 | 659 | 481 | 475 |
| 1765359365 | 239 | 723 | 661 | 481 | 478 |
| 1765357568 | 235 | 726 | 664 | 483 | 478 |
| 1765355765 | 236 | 728 | 665 | 484 | 479 |
| 1765353967 | 236 | 731 | 669 | 485 | 481 |
| 1765352164 | 239 | 733 | 671 | 486 | 483 |
| 1765350366 | 236 | 736 | 674 | 489 | 485 |
| 1765348565 | 236 | 738 | 677 | 492 | 488 |
| 1765346768 | 238 | 742 | 680 | 496 | 491 |
| 1765344964 | 240 | 744 | 682 | 499 | 493 |
| 1765343166 | 238 | 748 | 686 | 502 | 496 |
| 1765341365 | 239 | 750 | 689 | 506 | 500 |
| 1765339567 | 239 | 752 | 690 | 514 | 503 |
| 1765337764 | 239 | 752 | 691 | 510 | 501 |
| 1765335966 | 239 | 755 | 695 | 516 | 507 |
| 1765334164 | 242 | 762 | 699 | 525 | 515 |
| 1765332369 | 242 | 756 | 697 | 520 | 515 |
*Used Equation Coefficients:
DC: 0, 1, 0
PC Board: 0, 1, 0
Ambient: 0, 1, 0
upper: 0, 1, 0
lower: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)