This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765452767 | 10.34 | 135.41 | 327 | 448 | 0 |
| 1765452374 | 10.31 | 135.41 | 322 | 448 | 0 |
| 1765450968 | 10.34 | 135.41 | 327 | 448 | 0 |
| 1765450575 | 10.34 | 134.53 | 327 | 448 | 0 |
| 1765449169 | 10.34 | 132.78 | 327 | 447 | 0 |
| 1765448774 | 10.37 | 132.78 | 322 | 448 | 0 |
| 1765447370 | 10.31 | 131.9 | 322 | 447 | 0 |
| 1765446975 | 10.34 | 130.14 | 322 | 446 | 0 |
| 1765445571 | 10.34 | 128.38 | 322 | 444 | 0 |
| 1765445174 | 10.34 | 128.38 | 322 | 443 | 0 |
| 1765443772 | 10.34 | 125.74 | 322 | 440 | 0 |
| 1765443375 | 10.31 | 127.5 | 322 | 440 | 0 |
| 1765441973 | 10.34 | 128.38 | 322 | 439 | 0 |
| 1765441574 | 10.31 | 128.38 | 322 | 438 | 0 |
| 1765440173 | 10.31 | 130.14 | 332 | 442 | 0 |
| 1765439775 | 10.34 | 130.14 | 327 | 442 | 0 |
| 1765438376 | 10.34 | 134.53 | 327 | 443 | 0 |
| 1765437974 | 10.34 | 134.53 | 327 | 443 | 0 |
| 1765436575 | 10.34 | 138.05 | 332 | 447 | 0 |
| 1765436175 | 10.34 | 138.93 | 327 | 448 | 0 |
| 1765434777 | 10.34 | 141.57 | 332 | 454 | 0 |
| 1765434374 | 10.34 | 141.57 | 327 | 455 | 0 |
| 1765432978 | 10.31 | 140.69 | 332 | 454 | 0 |
| 1765432574 | 10.31 | 139.81 | 332 | 453 | 0 |
| 1765431179 | 10.34 | 139.81 | 332 | 453 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.879, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)