This is the latest recevied telemetry packets stored in our database for station/object SP6RJ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765318580 | 578 Count | 0 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1765317980 | 569 Count | 0 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1765317380 | 560 Count | 0 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1765316780 | 551 Count | 0 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1765316180 | 544 Count | 0 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1765315580 | 536 Count | 0 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1765314980 | 526 Count | 0 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1765314379 | 520 Count | 0 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1765313779 | 507 Count | 0 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1765313184 | 499 Count | 0 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1765312583 | 491 Count | 0 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1765311982 | 482 Count | 0 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1765311381 | 474 Count | 0 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1765310781 | 469 Count | 0 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1765310181 | 462 Count | 0 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1765309581 | 453 Count | 0 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1765308981 | 448 Count | 0 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1765308380 | 438 Count | 0 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1765307780 | 430 Count | 0 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1765307180 | 424 Count | 0 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1765306580 | 413 Count | 0 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1765305980 | 406 Count | 0 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1765305380 | 398 Count | 0 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1765304780 | 388 Count | 0 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1765304180 | 380 Count | 0 Count | 0 Count | 4.27 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)