This is the latest recevied telemetry packets stored in our database for station/object KD0AWK-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Solar* | Temp* | Sats* | Lock* | Value5* |
|---|---|---|---|---|---|
| 1765316596 | 3.28 Volts | 15 Deg C | 7 | 1 | 1 |
| 1765316476 | 3.46 Volts | 13 Deg C | 7 | 1 | 1 |
| 1765316356 | 3.66 Volts | 13 Deg C | 7 | 1 | 1 |
| 1765316236 | 3.8 Volts | 14 Deg C | 8 | 1 | 1 |
| 1765316116 | 3.88 Volts | 16 Deg C | 7 | 1 | 1 |
| 1765315996 | 3.96 Volts | 16 Deg C | 7 | 1 | 1 |
| 1765315876 | 4 Volts | 14 Deg C | 8 | 1 | 1 |
| 1765315756 | 4.04 Volts | 14 Deg C | 8 | 1 | 1 |
| 1765315636 | 4.1 Volts | 15 Deg C | 7 | 1 | 1 |
| 1765315516 | 4.14 Volts | 13 Deg C | 7 | 1 | 1 |
| 1765315396 | 4.14 Volts | 15 Deg C | 8 | 1 | 1 |
| 1765315276 | 4.16 Volts | 14 Deg C | 8 | 1 | 1 |
| 1765315156 | 4.18 Volts | 15 Deg C | 7 | 1 | 1 |
| 1765315036 | 4.22 Volts | 14 Deg C | 8 | 1 | 1 |
| 1765314916 | 4.24 Volts | 15 Deg C | 7 | 1 | 1 |
| 1765314796 | 4.26 Volts | 16 Deg C | 8 | 1 | 1 |
| 1765314676 | 4.3 Volts | 14 Deg C | 8 | 1 | 1 |
| 1765314556 | 4.28 Volts | 15 Deg C | 9 | 1 | 1 |
| 1765314436 | 4.3 Volts | 16 Deg C | 9 | 1 | 1 |
| 1765314316 | 4.3 Volts | 17 Deg C | 9 | 1 | 1 |
| 1765314196 | 4.36 Volts | 14 Deg C | 9 | 1 | 1 |
| 1765314076 | 4.34 Volts | 15 Deg C | 9 | 1 | 1 |
| 1765313956 | 4.34 Volts | 18 Deg C | 8 | 1 | 1 |
| 1765313836 | 4.38 Volts | 16 Deg C | 9 | 1 | 1 |
| 1765313716 | 4.38 Volts | 19 Deg C | 7 | 1 | 1 |
*Used Equation Coefficients:
Solar: 0, 0.01, 0
Temp: 0, 1, -273
Sats: 0, 1, 0
Lock: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)