K0FTT Automobiles

My position About ☰

reset

SP2RO-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2RO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1765369708	45 Count	365 Count	24 Count	2.27 VDC
1765368807	43 Count	352 Count	23 Count	2.19 VDC
1765367906	41 Count	337 Count	22 Count	2.45 VDC
1765367005	39 Count	324 Count	21 Count	2.35 VDC
1765366105	37 Count	305 Count	20 Count	2.48 VDC
1765365204	35 Count	293 Count	19 Count	2.17 VDC
1765364303	33 Count	279 Count	18 Count	2.15 VDC
1765363402	31 Count	258 Count	17 Count	2.1 VDC
1765362501	29 Count	226 Count	16 Count	2.2 VDC
1765361600	27 Count	201 Count	15 Count	2.2 VDC
1765360700	25 Count	172 Count	14 Count	2.19 VDC
1765359799	23 Count	164 Count	13 Count	2.28 VDC
1765358898	19 Count	147 Count	10 Count	2.13 VDC
1765357998	17 Count	130 Count	9 Count	2.27 VDC
1765357097	15 Count	112 Count	8 Count	2.03 VDC
1765356196	13 Count	102 Count	7 Count	2.14 VDC
1765355295	11 Count	88 Count	6 Count	2.16 VDC
1765354394	9 Count	71 Count	5 Count	2.19 VDC
1765353493	7 Count	56 Count	4 Count	2.17 VDC
1765352592	5 Count	46 Count	3 Count	2.09 VDC
1765351691	3 Count	34 Count	2 Count	2.04 VDC
1765350791	1 Count	19 Count	1 Count	2.04 VDC
1765349890	165 Count	1017 Count	97 Count	2.03 VDC
1765348989	162 Count	1000 Count	96 Count	2.06 VDC
1765348126	157 Count	988 Count	95 Count	2.12 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)