This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765380893 | 0 Count | 885 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1765377293 | 0 Count | 870 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1765373693 | 0 Count | 862 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1765370093 | 0 Count | 854 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1765366493 | 0 Count | 845 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1765362894 | 0 Count | 837 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1765359294 | 0 Count | 828 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1765355694 | 0 Count | 820 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1765352094 | 0 Count | 813 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1765348494 | 0 Count | 804 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1765344893 | 0 Count | 781 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1765341293 | 0 Count | 772 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1765337693 | 0 Count | 764 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1765334093 | 0 Count | 751 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1765330493 | 0 Count | 742 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1765326893 | 0 Count | 734 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1765323293 | 0 Count | 725 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1765319692 | 0 Count | 717 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1765316092 | 0 Count | 709 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1765312492 | 0 Count | 700 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1765308892 | 0 Count | 692 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1765305292 | 0 Count | 684 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1765301692 | 0 Count | 675 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1765298092 | 0 Count | 667 Count | 0 Count | 3.91 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)