K0FTT Automobiles

My position About ☰

reset

VE7EOL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE7EOL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Battery*	Temp*
1766021087	13.74 Volts	19.76 Deg.C
1766021046	14.09 Volts	19.76 Deg.C
1766021016	14.18 Volts	20.25 Deg.C
1766020989	14.03 Volts	20.74 Deg.C
1766020927	13.24 Volts	20.74 Deg.C
1766020897	13.51 Volts	20.25 Deg.C
1766020869	14.06 Volts	20.25 Deg.C
1766020855	14.27 Volts	20.25 Deg.C
1766020846	14.33 Volts	20.25 Deg.C
1766020828	14.33 Volts	20.25 Deg.C
1766020823	13.89 Volts	20.25 Deg.C
1766020807	13.62 Volts	20.25 Deg.C
1766020803	13.71 Volts	20.25 Deg.C
1766020767	14.12 Volts	19.76 Deg.C
1766020708	14.33 Volts	19.76 Deg.C
1766020681	14.27 Volts	19.27 Deg.C
1766020651	14.18 Volts	19.27 Deg.C
1766020646	14.18 Volts	19.27 Deg.C
1766020630	14.21 Volts	19.27 Deg.C
1766020483	14.15 Volts	18.29 Deg.C
1766020478	13.86 Volts	17.81 Deg.C
1766020424	14.09 Volts	16.83 Deg.C
1766020419	14.12 Volts	16.83 Deg.C
1766020388	12.86 Volts	16.34 Deg.C
1766020359	14.03 Volts	15.85 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.489, -273.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)