This is the latest recevied telemetry packets stored in our database for station/object SP3HUO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765468169 | 869 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765466368 | 868 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765464567 | 867 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765462767 | 866 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765460974 | 865 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765459173 | 864 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765457372 | 863 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765455572 | 862 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765453771 | 861 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765451970 | 860 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765450169 | 859 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765448369 | 858 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765446568 | 857 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765444767 | 856 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765442966 | 855 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765441166 | 854 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765439374 | 853 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765437573 | 852 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765435773 | 851 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765433972 | 850 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765432171 | 849 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765430370 | 848 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765428570 | 847 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765426769 | 846 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
| 1765424968 | 845 Count | 16 Count | 15 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)