This is the latest recevied telemetry packets stored in our database for station/object SQ1BHQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766183899 | 60 Count | 131 Count | 38 Count | 4.27 VDC | 0.14 VDC |
| 1766182097 | 59 Count | 131 Count | 38 Count | 4.24 VDC | 0.14 VDC |
| 1766180294 | 58 Count | 131 Count | 38 Count | 4.3 VDC | 0.14 VDC |
| 1766178491 | 57 Count | 131 Count | 38 Count | 4.23 VDC | 0.14 VDC |
| 1766176688 | 56 Count | 131 Count | 38 Count | 4.29 VDC | 0.14 VDC |
| 1766174886 | 55 Count | 131 Count | 38 Count | 4.24 VDC | 0.14 VDC |
| 1766173083 | 54 Count | 131 Count | 38 Count | 4.29 VDC | 0.14 VDC |
| 1766171280 | 53 Count | 131 Count | 38 Count | 4.24 VDC | 0.14 VDC |
| 1766169477 | 52 Count | 131 Count | 38 Count | 4.32 VDC | 0.14 VDC |
| 1766167674 | 51 Count | 131 Count | 38 Count | 4.25 VDC | 0.14 VDC |
| 1766165872 | 50 Count | 131 Count | 38 Count | 4.25 VDC | 0.14 VDC |
| 1766164103 | 49 Count | 131 Count | 38 Count | 4.27 VDC | 0.14 VDC |
| 1766162300 | 48 Count | 131 Count | 38 Count | 4.28 VDC | 0.14 VDC |
| 1766160497 | 47 Count | 131 Count | 38 Count | 4.26 VDC | 0.14 VDC |
| 1766158694 | 46 Count | 131 Count | 38 Count | 4.24 VDC | 0.14 VDC |
| 1766156891 | 44 Count | 129 Count | 37 Count | 4.3 VDC | 0.14 VDC |
| 1766155089 | 21 Count | 98 Count | 15 Count | 4.31 VDC | 0.14 VDC |
| 1766153286 | 16 Count | 66 Count | 11 Count | 4.31 VDC | 0.14 VDC |
| 1766151483 | 13 Count | 57 Count | 9 Count | 4.25 VDC | 0.14 VDC |
| 1766149680 | 9 Count | 21 Count | 6 Count | 4.26 VDC | 0.14 VDC |
| 1766147878 | 6 Count | 14 Count | 4 Count | 4.23 VDC | 0.14 VDC |
| 1766146075 | 3 Count | 10 Count | 2 Count | 4.24 VDC | 0.14 VDC |
| 1766144272 | 0 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1766142501 | 673 Count | 996 Count | 523 Count | 4.32 VDC | 0.14 VDC |
| 1766140698 | 654 Count | 959 Count | 505 Count | 4.32 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)