This is the latest recevied telemetry packets stored in our database for station/object WB5PJB-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765327595 | 16 C | 34.87 % | 0 hPa | 0 | 0 |
| 1765327387 | 15.7 C | 35.34 % | 0 hPa | 0 | 0 |
| 1765327092 | 15.3 C | 35.63 % | 0 hPa | 0 | 0 |
| 1765326738 | 14.8 C | 35.78 % | 1034.13 hPa | 0 | 0 |
| 1765326488 | 14.5 C | 35.19 % | 1033.63 hPa | 0 | 0 |
| 1765325823 | 14.1 C | 33.85 % | 1030.88 hPa | 0 | 0 |
| 1765325615 | 14.2 C | 33.19 % | 815.88 hPa | 0 | 0 |
| 1765291277 | 11.4 C | 39.54 % | 1031.38 hPa | 0 | 0 |
| 1765291033 | 10.8 C | 40.27 % | 1033.75 hPa | 0 | 0 |
| 1765290823 | 10.2 C | 41.27 % | 1035 hPa | 0 | 0 |
| 1765290566 | 9.5 C | 41.2 % | 0 hPa | 0 | 0 |
| 1765290216 | 9.2 C | 39.93 % | 0 hPa | 0 | 0 |
| 1765289977 | 9.1 C | 39 % | 0 hPa | 0 | 0 |
| 1765289764 | 9 C | 35.64 % | 793.25 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)