This is the latest recevied telemetry packets stored in our database for station/object TA1EKK-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Link A* | Link B* | Sinyal* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765461258 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765461138 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765461022 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765449549 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765449429 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765449309 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765449189 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765449069 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765448949 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765448829 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765448709 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765448589 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765448469 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765448349 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765448229 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765448109 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765432935 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765432815 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765432695 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765432575 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765432455 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765432335 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765432215 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765432095 | 0 | 0 | 0.01 mW | 0 | 0 |
| 1765431975 | 0 | 0 | 0.01 mW | 0 | 0 |
*Used Equation Coefficients:
Link A: 0, 1, 0
Link B: 0, 1, 0
Sinyal: 0, 0.01, 0.01
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)