This is the latest recevied telemetry packets stored in our database for station/object VK2HFG-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | CPU* | Tx* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765392368 | 12.2 Volts | 50 DegC | 46 pkts | 0 | 0 |
| 1765388769 | 12.3 Volts | 50 DegC | 43 pkts | 0 | 0 |
| 1765385168 | 12.3 Volts | 51 DegC | 49 pkts | 0 | 0 |
| 1765381568 | 12.4 Volts | 51 DegC | 50 pkts | 0 | 0 |
| 1765377968 | 12.3 Volts | 53 DegC | 44 pkts | 0 | 0 |
| 1765374368 | 12.4 Volts | 54 DegC | 47 pkts | 0 | 0 |
| 1765370768 | 12.4 Volts | 55 DegC | 40 pkts | 0 | 0 |
| 1765367169 | 12.5 Volts | 56 DegC | 46 pkts | 0 | 0 |
| 1765363568 | 12.5 Volts | 56 DegC | 47 pkts | 0 | 0 |
| 1765359968 | 12.5 Volts | 57 DegC | 49 pkts | 0 | 0 |
| 1765356368 | 12.5 Volts | 59 DegC | 40 pkts | 0 | 0 |
| 1765352769 | 12.7 Volts | 63 DegC | 48 pkts | 0 | 0 |
| 1765349169 | 12.7 Volts | 67 DegC | 39 pkts | 0 | 0 |
| 1765345568 | 12.9 Volts | 69 DegC | 38 pkts | 0 | 0 |
| 1765341968 | 13.6 Volts | 72 DegC | 41 pkts | 0 | 0 |
| 1765338368 | 13.7 Volts | 75 DegC | 42 pkts | 0 | 0 |
| 1765334768 | 13.6 Volts | 74 DegC | 41 pkts | 0 | 0 |
| 1765331168 | 13.9 Volts | 71 DegC | 46 pkts | 0 | 0 |
| 1765327568 | 13.7 Volts | 68 DegC | 32 pkts | 0 | 0 |
| 1765323967 | 13.6 Volts | 64 DegC | 47 pkts | 0 | 0 |
| 1765320368 | 13.2 Volts | 59 DegC | 48 pkts | 0 | 0 |
| 1765316768 | 13 Volts | 55 DegC | 42 pkts | 0 | 0 |
| 1765313169 | 12.8 Volts | 52 DegC | 39 pkts | 0 | 0 |
| 1765309568 | 12.2 Volts | 50 DegC | 43 pkts | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.1, 0
CPU: 0, 1, 0
Tx: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)