This is the latest recevied telemetry packets stored in our database for station/object WA7DEM-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765367039 | 12.96 Volts | 51.84 Deg.F | 0 | 0 | 0 |
| 1765365247 | 12.96 Volts | 51.84 Deg.F | 0 | 0 | 0 |
| 1765363456 | 12.96 Volts | 51.84 Deg.F | 0 | 0 | 0 |
| 1765361665 | 12.99 Volts | 50.96 Deg.F | 0 | 0 | 0 |
| 1765359877 | 12.96 Volts | 50.96 Deg.F | 0 | 0 | 0 |
| 1765356294 | 12.96 Volts | 50.08 Deg.F | 0 | 0 | 0 |
| 1765354501 | 12.96 Volts | 48.32 Deg.F | 0 | 0 | 0 |
| 1765352711 | 12.99 Volts | 48.32 Deg.F | 0 | 0 | 0 |
| 1765350919 | 12.96 Volts | 47.44 Deg.F | 0 | 0 | 0 |
| 1765347338 | 12.99 Volts | 47.44 Deg.F | 0 | 0 | 0 |
| 1765345549 | 12.99 Volts | 47.44 Deg.F | 0 | 0 | 0 |
| 1765343756 | 12.99 Volts | 47.44 Deg.F | 0 | 0 | 0 |
| 1765336593 | 13.02 Volts | 47.44 Deg.F | 0 | 0 | 0 |
| 1765320477 | 13.05 Volts | 50.96 Deg.F | 0 | 0 | 0 |
| 1765316895 | 13.11 Volts | 53.6 Deg.F | 0 | 0 | 0 |
| 1765315103 | 13.14 Volts | 51.84 Deg.F | 0 | 0 | 0 |
| 1765313314 | 13.11 Volts | 51.84 Deg.F | 0 | 0 | 0 |
| 1765309732 | 13.11 Volts | 50.08 Deg.F | 0 | 0 | 0 |
| 1765304359 | 12.99 Volts | 48.32 Deg.F | 0 | 0 | 0 |
| 1765300778 | 12.9 Volts | 46.56 Deg.F | 0 | 0 | 0 |
| 1765297197 | 12.84 Volts | 46.56 Deg.F | 0 | 0 | 0 |
| 1765290036 | 12.87 Volts | 46.56 Deg.F | 0 | 0 | 0 |
| 1765288246 | 12.87 Volts | 46.56 Deg.F | 0 | 0 | 0 |
| 1765284664 | 12.87 Volts | 46.56 Deg.F | 0 | 0 | 0 |
| 1765282873 | 12.9 Volts | 46.56 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0.48
Temp: 0, 0.88, -470
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)