This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765454813 | 13 Count | 36 Count | 0 Count | 3.99 VDC | 4.26 VDC |
| 1765453012 | 11 Count | 28 Count | 0 Count | 3.99 VDC | 4.28 VDC |
| 1765451211 | 9 Count | 20 Count | 0 Count | 3.99 VDC | 4.34 VDC |
| 1765449413 | 7 Count | 12 Count | 0 Count | 3.99 VDC | 4.34 VDC |
| 1765447601 | 0 Count | 5 Count | 0 Count | 3.99 VDC | 4.28 VDC |
| 1765445803 | 174 Count | 984 Count | 0 Count | 3.97 VDC | 4.32 VDC |
| 1765444003 | 172 Count | 967 Count | 0 Count | 3.97 VDC | 4.32 VDC |
| 1765442201 | 170 Count | 956 Count | 0 Count | 3.96 VDC | 4.26 VDC |
| 1765440404 | 168 Count | 948 Count | 0 Count | 3.95 VDC | 4.24 VDC |
| 1765438604 | 166 Count | 916 Count | 0 Count | 3.94 VDC | 4.24 VDC |
| 1765436804 | 164 Count | 901 Count | 0 Count | 3.93 VDC | 2.54 VDC |
| 1765435004 | 162 Count | 890 Count | 0 Count | 3.94 VDC | 1.92 VDC |
| 1765433206 | 160 Count | 875 Count | 0 Count | 3.94 VDC | 1 VDC |
| 1765431405 | 158 Count | 866 Count | 0 Count | 3.94 VDC | 1 VDC |
| 1765429607 | 156 Count | 853 Count | 0 Count | 3.94 VDC | 1 VDC |
| 1765427807 | 154 Count | 843 Count | 0 Count | 3.94 VDC | 1 VDC |
| 1765425998 | 147 Count | 833 Count | 0 Count | 3.94 VDC | 1 VDC |
| 1765424199 | 145 Count | 822 Count | 0 Count | 3.94 VDC | 1 VDC |
| 1765422401 | 143 Count | 812 Count | 0 Count | 3.94 VDC | 1 VDC |
| 1765420602 | 141 Count | 802 Count | 0 Count | 3.94 VDC | 1 VDC |
| 1765418803 | 139 Count | 791 Count | 0 Count | 3.94 VDC | 1 VDC |
| 1765417005 | 137 Count | 781 Count | 0 Count | 3.95 VDC | 1 VDC |
| 1765415205 | 135 Count | 767 Count | 0 Count | 3.95 VDC | 1 VDC |
| 1765413405 | 133 Count | 755 Count | 0 Count | 3.95 VDC | 1 VDC |
| 1765411605 | 131 Count | 743 Count | 0 Count | 3.95 VDC | 1 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)