This is the latest recevied telemetry packets stored in our database for station/object SP6QKM-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1767215762 | 254 | 7 | 147 | 0 | 0 |
| 1767215545 | 250 | 6 | 200 | 0 | 0 |
| 1767215329 | 247 | 6 | 245 | 0 | 0 |
| 1767215118 | 245 | 6 | 305 | 0 | 0 |
| 1767214928 | 241 | 6 | 352 | 0 | 0 |
| 1767214737 | 238 | 6 | 411 | 0 | 0 |
| 1767214547 | 236 | 5 | 469 | 0 | 0 |
| 1767214357 | 234 | 5 | 529 | 0 | 0 |
| 1767214166 | 231 | 6 | 596 | 0 | 0 |
| 1767213976 | 229 | 6 | 671 | 0 | 0 |
| 1767213786 | 228 | 6 | 754 | 0 | 0 |
| 1767213595 | 226 | 6 | 833 | 0 | 0 |
| 1767213405 | 226 | 6 | 915 | 0 | 0 |
| 1767213215 | 227 | 6 | 1010 | 0 | 0 |
| 1767213024 | 227 | 6 | 1087 | 0 | 0 |
| 1767212834 | 226 | 6 | 1187 | 0 | 0 |
| 1767212644 | 228 | 7 | 1281 | 0 | 0 |
| 1767212453 | 228 | 7 | 1404 | 0 | 0 |
| 1767212262 | 231 | 7 | 1530 | 0 | 0 |
| 1767212072 | 228 | 7 | 1686 | 0 | 0 |
| 1767211881 | 229 | 7 | 1869 | 0 | 0 |
| 1767211689 | 230 | 7 | 2087 | 0 | 0 |
| 1767211498 | 232 | 4 | 2320 | 0 | 0 |
| 1767211306 | 233 | 7 | 2244 | 0 | 0 |
| 1767211115 | 234 | 8 | 2184 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)