K0FTT Automobiles

My position About ☰

reset

VK2GJ-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vbat*	Psys*	Temp*	AirP*
1765414854	3.98 V	114 mW	32.5 degC	100550 Pa
1765414217	3.97 V	142 mW	33.7 degC	100525 Pa
1765413809	3.98 V	142 mW	33.4 degC	100537.5 Pa
1765413429	3.98 V	110 mW	31.7 degC	100550 Pa
1765413043	3.98 V	126 mW	31.9 degC	100550 Pa
1765412713	3.99 V	128 mW	32.3 degC	100550 Pa
1765412330	3.98 V	122 mW	32.4 degC	100550 Pa
1765411997	3.98 V	134 mW	32.3 degC	100550 Pa
1765411654	3.98 V	154 mW	33.7 degC	100537.5 Pa
1765411376	3.98 V	168 mW	33.8 degC	100537.5 Pa
1765410984	3.98 V	156 mW	34.1 degC	100537.5 Pa
1765410527	3.98 V	128 mW	32.4 degC	100537.5 Pa
1765410240	3.98 V	134 mW	33.5 degC	100525 Pa
1765409835	3.98 V	130 mW	33 degC	100525 Pa
1765409501	3.98 V	136 mW	33.6 degC	100512.5 Pa
1765409127	3.98 V	166 mW	33.8 degC	100500 Pa
1765408850	3.98 V	168 mW	34.3 degC	100500 Pa
1765408431	3.98 V	146 mW	33.3 degC	100487.5 Pa
1765408074	3.98 V	128 mW	31.5 degC	100487.5 Pa
1765407631	3.98 V	110 mW	31.4 degC	100475 Pa
1765407297	3.98 V	148 mW	32.7 degC	100475 Pa
1765406969	3.98 V	140 mW	33.1 degC	100475 Pa
1765406573	3.98 V	136 mW	31.9 degC	100500 Pa
1765406199	3.98 V	114 mW	31.5 degC	100487.5 Pa
1765405869	3.98 V	132 mW	31.6 degC	100500 Pa

*Used Equation Coefficients:

Vbat: 0, 0.001, 0

Vsol: 0, 0.001, 0

Psys: 0, 2, 0

Temp: 0, 0.1, -100

AirP: 0, 12.5, 500

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)