This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765372023 | 1 Count | 18 Count | 1 Count | 4.11 VDC | 4.32 VDC |
| 1765371123 | 134 Count | 1014 Count | 75 Count | 4.12 VDC | 4.32 VDC |
| 1765370223 | 132 Count | 991 Count | 74 Count | 4.12 VDC | 4.32 VDC |
| 1765369323 | 130 Count | 969 Count | 73 Count | 4.11 VDC | 5.38 VDC |
| 1765368423 | 128 Count | 948 Count | 72 Count | 4.15 VDC | 4.4 VDC |
| 1765367524 | 126 Count | 928 Count | 71 Count | 4.11 VDC | 5.4 VDC |
| 1765366623 | 123 Count | 907 Count | 69 Count | 4.15 VDC | 4.42 VDC |
| 1765365723 | 122 Count | 889 Count | 69 Count | 4.15 VDC | 5.22 VDC |
| 1765364825 | 119 Count | 865 Count | 67 Count | 4.15 VDC | 5.2 VDC |
| 1765363925 | 118 Count | 843 Count | 67 Count | 4.15 VDC | 5.18 VDC |
| 1765363024 | 115 Count | 818 Count | 65 Count | 4.15 VDC | 5.16 VDC |
| 1765362125 | 113 Count | 803 Count | 64 Count | 4.15 VDC | 5.14 VDC |
| 1765361226 | 111 Count | 776 Count | 63 Count | 4.11 VDC | 4.38 VDC |
| 1765360326 | 109 Count | 758 Count | 62 Count | 4.12 VDC | 4.4 VDC |
| 1765359426 | 107 Count | 742 Count | 61 Count | 4.15 VDC | 5.12 VDC |
| 1765358526 | 105 Count | 731 Count | 60 Count | 4.12 VDC | 4.42 VDC |
| 1765357626 | 102 Count | 712 Count | 58 Count | 4.09 VDC | 4.3 VDC |
| 1765356726 | 101 Count | 699 Count | 58 Count | 4.08 VDC | 4.38 VDC |
| 1765355826 | 98 Count | 679 Count | 56 Count | 4.09 VDC | 4.32 VDC |
| 1765354927 | 97 Count | 670 Count | 56 Count | 4.08 VDC | 4.36 VDC |
| 1765353127 | 93 Count | 643 Count | 54 Count | 4.05 VDC | 4.2 VDC |
| 1765352228 | 91 Count | 626 Count | 53 Count | 4.04 VDC | 4.24 VDC |
| 1765351328 | 89 Count | 615 Count | 52 Count | 4.04 VDC | 4.24 VDC |
| 1765350428 | 87 Count | 601 Count | 51 Count | 4.04 VDC | 2.68 VDC |
| 1765349528 | 85 Count | 572 Count | 50 Count | 4.04 VDC | 1.22 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)