This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765320001 | 1390 | 86.2 | 45.1 | 76.7 | 0 |
| 1765319101 | 1392 | 87.1 | 46.2 | 77.8 | 0 |
| 1765318201 | 1389 | 87.8 | 47.2 | 78.2 | 0 |
| 1765317302 | 1390 | 88.9 | 47.2 | 79 | 0 |
| 1765316401 | 1391 | 89.9 | 47.8 | 80.3 | 0 |
| 1765315501 | 1393 | 90.6 | 47.8 | 81 | 0 |
| 1765314601 | 1391 | 91.2 | 47.8 | 81.5 | 0 |
| 1765313703 | 1390 | 92.3 | 48.9 | 82.1 | 0 |
| 1765312802 | 1392 | 93.5 | 49.4 | 83.8 | 0 |
| 1765311901 | 1390 | 93.8 | 49.4 | 85 | 0 |
| 1765311002 | 1390 | 93 | 49.4 | 84.6 | 0 |
| 1765310102 | 1390 | 92.2 | 48.9 | 83.8 | 0 |
| 1765309202 | 1390 | 91.1 | 47.2 | 83.3 | 0 |
| 1765308301 | 1391 | 89.5 | 47.8 | 81.7 | 0 |
| 1765307402 | 1391 | 88.1 | 46.2 | 79.9 | 0 |
| 1765306503 | 1393 | 87.2 | 46.2 | 79.5 | 0 |
| 1765305602 | 1392 | 85.9 | 45.1 | 78.9 | 0 |
| 1765304702 | 1391 | 83.8 | 44.5 | 77 | 0 |
| 1765303802 | 1391 | 81.7 | 42.9 | 74.4 | 0 |
| 1765302903 | 1391 | 79.7 | 41.9 | 72.6 | 0 |
| 1765302002 | 1391 | 77.8 | 40.8 | 70.4 | 0 |
| 1765301101 | 1392 | 76.1 | 40.2 | 68.4 | 0 |
| 1765300201 | 1392 | 74.8 | 39.7 | 67.3 | 0 |
| 1765299302 | 1392 | 73 | 38.6 | 65.9 | 0 |
| 1765298401 | 1392 | 71 | 36.5 | 64.1 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 1000
Value2: 0, 0.1, 0
Value3: 0, 0.1, 0
Value4: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)