This is the latest recevied telemetry packets stored in our database for station/object BG2VZP-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765357776 | 7 | 220 | 1006 | 1149 | 0 |
| 1765354745 | 8 | 221 | 1006 | 1149 | 0 |
| 1765351728 | 10 | 229 | 1006 | 1146 | 0 |
| 1765348715 | 9 | 245 | 1006 | 1149 | 0 |
| 1765345701 | 7 | 271 | 1006 | 1149 | 0 |
| 1765342684 | 7 | 317 | 1007 | 1152 | 0 |
| 1765339658 | 9 | 310 | 1008 | 1152 | 0 |
| 1765336616 | 7 | 289 | 1009 | 1152 | 0 |
| 1765333501 | 8 | 234 | 1010 | 1146 | 0 |
| 1765330449 | 5 | 209 | 1010 | 1149 | 0 |
| 1765327405 | 9 | 193 | 1010 | 1146 | 0 |
| 1765324311 | 8 | 188 | 1010 | 1149 | 0 |
| 1765321221 | 7 | 183 | 1010 | 1146 | 0 |
| 1765318169 | 10 | 181 | 1010 | 1146 | 0 |
| 1765315132 | 7 | 179 | 1010 | 1149 | 0 |
| 1765312098 | 9 | 178 | 1010 | 1152 | 0 |
| 1765309067 | 10 | 176 | 1011 | 1149 | 0 |
| 1765306031 | 10 | 173 | 1011 | 1149 | 0 |
| 1765302995 | 10 | 171 | 1011 | 1146 | 0 |
| 1765299964 | 9 | 171 | 1012 | 1149 | 0 |
| 1765296931 | 10 | 169 | 1012 | 1149 | 0 |
| 1765293894 | 12 | 168 | 1013 | 1146 | 0 |
| 1765290853 | 11 | 168 | 1012 | 1146 | 0 |
| 1765287826 | 9 | 171 | 1012 | 1149 | 0 |
| 1765284795 | 7 | 170 | 1013 | 1146 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)