This is the latest recevied telemetry packets stored in our database for station/object SQ8BS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765456853 | 0 Count | 250 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1765456553 | 0 Count | 243 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1765456253 | 0 Count | 237 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1765455953 | 0 Count | 234 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1765455653 | 0 Count | 228 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1765455353 | 0 Count | 223 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1765455053 | 0 Count | 218 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1765454753 | 0 Count | 211 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1765454453 | 0 Count | 206 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1765454152 | 0 Count | 200 Count | 0 Count | 4.45 VDC | 0 VDC |
| 1765453852 | 0 Count | 194 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1765453552 | 0 Count | 189 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1765453252 | 0 Count | 181 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1765452952 | 0 Count | 173 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1765452652 | 0 Count | 168 Count | 0 Count | 4.37 VDC | 0 VDC |
| 1765452352 | 0 Count | 162 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1765452052 | 0 Count | 153 Count | 0 Count | 4.41 VDC | 0 VDC |
| 1765451752 | 0 Count | 145 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1765451452 | 0 Count | 139 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1765451152 | 0 Count | 131 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1765450852 | 0 Count | 126 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1765450551 | 0 Count | 119 Count | 0 Count | 4.47 VDC | 0 VDC |
| 1765450251 | 0 Count | 109 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1765449951 | 0 Count | 103 Count | 0 Count | 4.49 VDC | 0 VDC |
| 1765449651 | 0 Count | 96 Count | 0 Count | 4.39 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)