This is the latest recevied telemetry packets stored in our database for station/object SQ6IUS-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765383965 | 4.22 VDC | 12.4 VDC | 0 | 0 | 0 |
| 1765383065 | 4.22 VDC | 12.42 VDC | 0 | 0 | 0 |
| 1765382165 | 4.22 VDC | 12.42 VDC | 0 | 0 | 0 |
| 1765381265 | 4.22 VDC | 12.14 VDC | 0 | 0 | 0 |
| 1765380364 | 4.22 VDC | 12.14 VDC | 0 | 0 | 0 |
| 1765379464 | 4.22 VDC | 12.14 VDC | 0 | 0 | 0 |
| 1765378564 | 4.22 VDC | 12.2 VDC | 0 | 0 | 0 |
| 1765377664 | 4.23 VDC | 12.46 VDC | 0 | 0 | 0 |
| 1765376764 | 4.22 VDC | 12.48 VDC | 0 | 0 | 0 |
| 1765375864 | 4.22 VDC | 12.52 VDC | 0 | 0 | 0 |
| 1765374964 | 4.22 VDC | 12.54 VDC | 0 | 0 | 0 |
| 1765374064 | 4.22 VDC | 12.62 VDC | 0 | 0 | 0 |
| 1765373164 | 4.22 VDC | 12.62 VDC | 0 | 0 | 0 |
| 1765372264 | 4.23 VDC | 12.66 VDC | 0 | 0 | 0 |
| 1765371364 | 4.22 VDC | 12.68 VDC | 0 | 0 | 0 |
| 1765370464 | 4.22 VDC | 12.74 VDC | 0 | 0 | 0 |
| 1765369563 | 4.23 VDC | 12.84 VDC | 0 | 0 | 0 |
| 1765368664 | 4.22 VDC | 12.88 VDC | 0 | 0 | 0 |
| 1765367763 | 4.22 VDC | 12.88 VDC | 0 | 0 | 0 |
| 1765366863 | 4.22 VDC | 12.88 VDC | 0 | 0 | 0 |
| 1765365963 | 4.22 VDC | 12.92 VDC | 0 | 0 | 0 |
| 1765365063 | 4.22 VDC | 12.92 VDC | 0 | 0 | 0 |
| 1765364163 | 4.22 VDC | 13.02 VDC | 0 | 0 | 0 |
| 1765363263 | 4.22 VDC | 12.8 VDC | 0 | 0 | 0 |
| 1765362363 | 4.23 VDC | 13.04 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)