This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765452746 | 121 Count | 188 Count | 100 Count | 3.64 VDC | 3.9 VDC |
| 1765450950 | 114 Count | 178 Count | 94 Count | 3.64 VDC | 4.02 VDC |
| 1765449153 | 107 Count | 168 Count | 88 Count | 3.66 VDC | 4 VDC |
| 1765447354 | 101 Count | 162 Count | 83 Count | 3.7 VDC | 4.48 VDC |
| 1765445557 | 94 Count | 154 Count | 77 Count | 3.68 VDC | 4.4 VDC |
| 1765443760 | 88 Count | 148 Count | 72 Count | 3.66 VDC | 4.36 VDC |
| 1765441962 | 82 Count | 142 Count | 67 Count | 3.52 VDC | 3.9 VDC |
| 1765441952 | 77 Count | 142 Count | 67 Count | 3.52 VDC | 3.74 VDC |
| 1765440155 | 71 Count | 134 Count | 62 Count | 3.51 VDC | 2.52 VDC |
| 1765438358 | 64 Count | 125 Count | 56 Count | 3.52 VDC | 3.9 VDC |
| 1765436562 | 56 Count | 115 Count | 49 Count | 3.5 VDC | 1.78 VDC |
| 1765434764 | 49 Count | 97 Count | 43 Count | 3.51 VDC | 0.6 VDC |
| 1765432966 | 42 Count | 60 Count | 37 Count | 3.51 VDC | 0 VDC |
| 1765431169 | 35 Count | 50 Count | 31 Count | 3.51 VDC | 0 VDC |
| 1765429372 | 28 Count | 40 Count | 25 Count | 3.52 VDC | 0 VDC |
| 1765427574 | 20 Count | 29 Count | 18 Count | 3.52 VDC | 0 VDC |
| 1765425776 | 13 Count | 19 Count | 12 Count | 3.52 VDC | 0 VDC |
| 1765423979 | 6 Count | 10 Count | 6 Count | 3.52 VDC | 0 VDC |
| 1765422182 | 639 Count | 1003 Count | 562 Count | 3.52 VDC | 0 VDC |
| 1765420385 | 632 Count | 990 Count | 556 Count | 3.52 VDC | 0 VDC |
| 1765418587 | 624 Count | 979 Count | 549 Count | 3.52 VDC | 0 VDC |
| 1765416790 | 617 Count | 969 Count | 543 Count | 3.52 VDC | 0 VDC |
| 1765414993 | 610 Count | 958 Count | 537 Count | 3.53 VDC | 0 VDC |
| 1765413196 | 602 Count | 946 Count | 530 Count | 3.53 VDC | 0 VDC |
| 1765411399 | 595 Count | 936 Count | 524 Count | 3.53 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)