This is the latest recevied telemetry packets stored in our database for station/object EA5SW-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765462422 | 0 Count | 126 Count | 0 Count | 0 VDC | 0 VDC |
| 1765460622 | 0 Count | 126 Count | 0 Count | 0 VDC | 0 VDC |
| 1765458822 | 0 Count | 113 Count | 0 Count | 0 VDC | 0 VDC |
| 1765457017 | 0 Count | 76 Count | 0 Count | 0 VDC | 0 VDC |
| 1765455217 | 0 Count | 65 Count | 0 Count | 0 VDC | 0 VDC |
| 1765453421 | 0 Count | 43 Count | 0 Count | 0 VDC | 0 VDC |
| 1765451617 | 0 Count | 1011 Count | 0 Count | 0 VDC | 0 VDC |
| 1765449817 | 0 Count | 967 Count | 0 Count | 0 VDC | 0 VDC |
| 1765448017 | 0 Count | 953 Count | 0 Count | 0 VDC | 0 VDC |
| 1765446217 | 0 Count | 931 Count | 0 Count | 0 VDC | 0 VDC |
| 1765444416 | 0 Count | 900 Count | 0 Count | 0 VDC | 0 VDC |
| 1765442616 | 0 Count | 860 Count | 0 Count | 0 VDC | 0 VDC |
| 1765440816 | 0 Count | 834 Count | 0 Count | 0 VDC | 0 VDC |
| 1765439016 | 0 Count | 808 Count | 0 Count | 0 VDC | 0 VDC |
| 1765437215 | 0 Count | 805 Count | 0 Count | 0 VDC | 0 VDC |
| 1765437178 | 0 Count | 805 Count | 0 Count | 0 VDC | 0 VDC |
| 1765436658 | 0 Count | 801 Count | 0 Count | 0 VDC | 0 VDC |
| 1765434857 | 0 Count | 787 Count | 0 Count | 0 VDC | 0 VDC |
| 1765433057 | 0 Count | 785 Count | 0 Count | 0 VDC | 0 VDC |
| 1765431257 | 0 Count | 779 Count | 0 Count | 0 VDC | 0 VDC |
| 1765429457 | 0 Count | 779 Count | 0 Count | 0 VDC | 0 VDC |
| 1765427657 | 0 Count | 779 Count | 0 Count | 0 VDC | 0 VDC |
| 1765425857 | 0 Count | 779 Count | 0 Count | 0 VDC | 0 VDC |
| 1765424057 | 0 Count | 779 Count | 0 Count | 0 VDC | 0 VDC |
| 1765422257 | 0 Count | 779 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)